Durst Theta 76R Manual do Utilizador descarregar pdf (Página 2)

TMS 2009-04a Fujicolor Crystal Archive Digital Type DPII

C(68

F)Temperature Equalization Periods

Unit: hours

Page 2 of 6

StorageTemperature

Paper Size

-20

(-4

(32

(50

127cm*50 m

(50 in. x 164 ft.)

12 10 7

NOTES

Do not heat paper in order to equalize

temperatures.

Remove paper from refrigeration on day

before use.

• If exposed paper remains unprocessed for

extended periods of time under normal

room conditions or is subjected to high

temperature and/or high humidity, changes

in the color balance and other properties

may occur.

• The time between exposure and

development should be fixed in order to

obtain consistent quality. Avoid waiting until

the next day to develop the exposed paper.

Rather than holding the paper for

processing the next day, initiate processing

as soon as possible.

Please refer to the following calibration data as a

general guide when using FUJICOLOR CRYSTAL

ARCHIVE PAPER on a digital printer.

All Frontiers requires a dedicated LUT when

printing. It is necessary to adjust for the paper type

for each paper magazine by changing the paper

“Type” specification in the “Paper Magazine

Registration” menu

Registration and Setup of the Paper Type

specification on Paper Magazine for Frontier

330/350/370/390 series

1. Log in to the “4 Setup and Maintenance”

menu with “SE2” for the user name, and

password of “7777”.

2. Select “5 Printer Adjustment/Maintenance”

– 1”Paper Magazine Registration” (Menu

451) and change the type to “I” as shown in

the table below.

Paper Type

Crystal Archive Paper type DPII I

3. Select “2 Print Condition Setup and Check”

– 1 Paper condition Setup” (menu 421) and

perform a paper condition setup for all

magazines for which the paper types are

changed

It is important to click the “initialize” button to initialize

the settings before making the paper condition setup.

After initialization the first paper condition setups will

deviate by a great degree, but this will be balanced

after the second or third attempt. (Please note that

clicking the “initialize” button wil not be possible if you

do not log in with a user name of lab administratot or

higher)

Registration and Setup of the Paper Type

specification on Paper Magazine for Frontier

340/355/375/550/570/590 series

1. Log in to the Setup and Maintenance menu

with password “7777”.

2. Select the <Adjustment/Maintenance>-

<02 Print Condition Setup and Check>-

<0221 Paper Magazine Registration>.

Change the paper type to “I” as shown in

the table below.

Paper Type

Crystal Archive Paper type DPII I

3. Click the <Setup and Maintenance> - <02

Print condition Setup and Check> - <0200

Paper Condition Setup> and perform a

paper condition setup for all magazines for

which the pater types are changed

It is important to click the “initialize” button to initialize

the settings before making the paper condition setup.

After initialization the first paper condition setups will

deviate by a great degree, but this will be balanced

after the second or third attempt. (Please note that

clicking the “initialize” button wil not be possible if you

do not log in with a user name of lab administratot or

higher)

Registration and Setup of the Paper Type

specification on Paper Magazine for Frontier

700 series

4. Use with Frontie

On the Maintenance Application display, click

the [maintenance] to access the Maintenance

display. Click [Extension] – [Setup] – [Laser

Setup] – [Paper Specification

Registration/Setup]

Select the paper type “I-1” or “I-2” as shown

in table below:

Paper Type Surface

Crystal Archive DPII I-1 G/L

Crystal Archive DPII I-2 M/S

Follow the instructions on the Paper Specification

registration/set up. Make the test prints and register

the measurement results.

5 . Use with other printers

Noritsu Reference Data.

Paper profile needs adjustment. Profile data is

available via your local Noritsu distributor

• For QSS 28 ~ QSS 35i series and LPS24

pro

1. Insert the Profile Data Vol.710 CD in the

CD-Rom drive.

2. Run Setup.exe from the CD-Rom

3. Follow instruction on screen. (see also

manual of Noritsu)

4. On the Order Display, click F button >

Menu > Extension > Setup > Laser Setup >

Paper Specification Registration/Set up.

Select paper number 160.

1 2 3 4 5 6

Comentários a estes Manuais

Sem comentários

Durst Theta 76R Manual do Utilizador Página 2

Comentários a estes Manuais